Pneumatic artificial muscles (PAMs) are contractile or extensional devices operated by pressurized air filling a pneumatic bladder. In a vague approximation of human muscles, PAMs are usually grouped in pairs: one agonist and one antagonist.
PAMs were first developed (under the name of McKibben Artificial Muscles) in the 1950s for use in artificial limbs. The Bridgestone rubber company (Japan) commercialized the idea in the 1980s under the name of Rubbertuators.
The retraction strength of the PAM is limited by the sum total strength of individual fibers in the woven shell. The exertion distance is limited by the tightness of the weave; a very loose weave allows greater bulging, which further twists individual fibers in the weave.
Examples of complex configurations of Air Muscles are used in the Shadow Dexterous Hand.[1]
Contents |
PAMs are very lightweight because their main element is a thin membrane. This allows them to be directly connected to the structure they power, which is an advantage when considering the replacement of a defective muscle. If a defective muscle has to be substituted, its location will always be known and its substitution becomes easier. This is an important characteristic, since the membrane is connected to rigid endpoints, which introduces tension concentrations and therefore possible membrane ruptures.
Another advantage of PAMs is their inherent compliant behaviour: when a force is exerted on the PAM, it "gives in", without increasing the force in the actuation. This is an important feature when the PAM is used as an actuator in a robot that interacts with a human, or when delicate operations have to be carried out.
In PAMs the force is not only dependent on pressure but also on their state of inflation. This is one of the major disadvantages, because the mathematical model that supports the PAMs functionality is a non-linear system, which makes them more difficult to control precisely. However, the relationship between force and extension in PAMs mirrors what is seen in the length-tension relationship in biological muscle systems.
There are also other disadvantages: gas is compressible, so a PAM that uses long tubes must have a control system that can deal with a delay between the movement control signal and the effective muscle action. A PAM actuator system needs electric valves and a compressed air generator too, which are neither light nor small.
Due to the loose-weave nature of the outer fiber shell, it is important for the surface fibers to stay evenly distributed and undisturbed across the internal bladder. If a gap is created by externally pushing an object into the loose weave, this gap allows nonuniform swelling of the internal bladder, which may inflate through the gap and rupture the internal bladder.
Although the technology is primarily pneumatically (gas) operated, there is nothing that prevents the technology from also being hydraulically (liquid) operated. Using an incompressible fluid increases system rigidity and reduces compliant behavior.